Use and maintenance of the pressure disk and resistance pressurizing device of screw presses

Pressure disk and resistance pressurizing device at the back of discharge opening of screw press.Controlled by cylinder.

By adjusting the preload force and position, the discharge resistance and the size of the slag outlet can be changed.

After dehydration, the dry material is discharged out of the machine through the outlet of the end of the screen cylinder and the body of the automatic cylinder resistance device.

The control of the pressure plate and resistance device at the outlet is through a specific design to effectively realize the automatic control of the dryness of the discharged material, i.e., after setting a certain squeezing pressure, the device will automatically realize the control of the pressure. Whether the cylinder is synchronized operation need to be checked every day, at least 1 time a month to find the right, such as not checking and maintenance of a but the cylinder does not synchronize the operation of the cylinder will seriously damage the cylinder and the components. Need to adjust the use of appropriate, not to change its design, monthly inspection of the seals to see if there is aging, wear and tear, deformation, etc., if found seal failure, timely replacement of seals such as damage and changes in the structure of the direct impact on the quality of the equipment and production efficiency.